1. 2017 Yamaha Fx Ho Waverunner Reviews

View and Download Yamaha FX HO owner's/operator's manual online. 2014 Waverunner. FX HO Boating Equipment pdf manual download. Also for: Fx cruiser ho. RESULTS 1 - 14 of 14 - Yamaha FX SVHO/FX Cruiser SVHO/2017 FX Limited SVHO Genuine. Yamaha FX SVHO, Cruiser SVHO Genuine Service Manual.

Low RPM Mode: The Low RPM Mode is a function that limits the maximum engine speed to approximately 70% of the maximum engine speed in the normal mode. The Low RPM Mode can only be activated and deactivated by operating the remote control transmitter that is included with this watercraft. The Low RPM Mode can only be activated when the engine is stopped in the unlock mode of the Yamaha Security System. Activation of the Low RPM Mode will be confirmed by the number of beeps when the remote control transmitter is operated, and by the “L-MODE” indicator light of the multifunction information center.

If the remote control transmitter is operated while the multifunction information center is in the standby state, the center performs the initial operation, and then the setting is selected. To activate the Low RPM Mode: Push the “L-Mode” (unlock) button on the remote control transmitter for more than 4 seconds. Once the beeper sounds three times and the “UNLOCK” indicator light blinks three times, then comes on, the “L-MODE” indicator light comes on and the Low RPM Mode is activated.

Catch the draining water in the sure that water is being discharged from the drain pan or soak it up with the dry cloth cooling water pilot outlet. Use multifunction information center to stop the this function as a reference only. The watercraft will go sharply if you apply throttle while turning the straight even though the handlebars are handlebars.

2017 Yamaha Fx Ho Waverunner Reviews

Do not go near others to their feet on the floor of the footwell and spray or splash them with water. Avoid sharp turns or other maneuvers that make it hard for others to avoid you or understand where you are going. Insert the garden hose conditions that can shorten the life of many adapter into the flushing hose connector watercraft components. Use a suitable marine grease applicator and spray a rust inhibitor between the inner and outer cables to lubricate the cables and purge out any dirt and moisture. Perform the pre-operation checks and post-operation checks before performing periodic maintenance.